wrong password??

[Magic]

Hello all,

running nxfilter on a RasPi
after the holidays i want to re-enable the filter but my password seems to be wrong
which is bizar, because i'm using KeePass to remember it... for ages
so after some research, i found the reset-pw.sh , executed it, but still cant seem to login (using admin/admin)

Am i missing something here ?



thanks !

M.

[support200]

Did you run that script while it's running? You should run it while it's running.

It should be working but if it doesn't stop it and zip your /nxfilter/db/config.h2.db file and send it to us at 'support@nxfilter.org'. We can reset the password.

[support200]

I copied your config DB file into our test server and I could login to admin GUI with admin/admin. It's already admin/admin. I guess there's something wrong with your browser. Try another browser. Could be some cache problem.

[Magic]

thanks for the effort !
i tried several browsers on 2 pc's, a phone and a tablet... getting the wrong password message on all of them
updated my raspi
stoped/started the nxfilter service
still without succes

any more ideas ?

[support200]

Did you get this kind of log message?

INFO [10-13 03:34:45] - ALDl, Login attempt for admin from 127.0.0.1.
INFO [10-13 03:34:45] - ALDlA, Password different!

If so, stop it and try these,

mv /nxfilter/db /nxfilter/xdb
mkdir /nxfilter/db

And restart it. And see if you can login with admin/admin. It's a new config DB. Just want to see if you can login with everything default.

[Magic]

hi,

didnt find that kind of messages in the log files
it's still not working, even when i do the move/new db-directory

[Magic]

stopped the service
disabled the service
moved the nxfilter-dir to nxfilterold
got the newest version .deb
installed that on my pi
created the service
started the service
...

same result... admin/admin still not working

[support200]

Whatever it is, it's not a password problem. You have rebuilt your config DB. Was there something changed from last login on your system? I guess there should be. But it's difficult to find.

Do you get anything in /nxfilter/log/nxfilter.log when you try to login?

tail -f /nxfilter/log/nxfilter/log

Or you just can start it on your CMD and watch its output.

[Magic]

nothing to be seen in the tail when i try to logon and get the wrong password message

[support200]

You mean you get the "wrong password message" but it's not in the log file? Send us all the log files in /nxfilter/log.

[support200]

Maybe you can zip whole /nxfilter directory and upload it somewhere and send us a link to it. We can test NxFilter itself. If you remove /nxfilter/log/traffic*, it will not be too big. Or you can test it on your PC.

[Magic]

i finally decided to rebuild all of my RasPi
i want to thank nxfilter.org for the effort in solving my issue (which was eventually a problem on my Pi (not nxfilter issue) )

[support200]

OK. Good to hear that. If it works for you, that's the best.